Electrofocus Electricals
Andheri East, Mumbai, Maharashtra
GST No. 27AACFP7871Q1ZD
Call 0804944311664% Response Rate
Send E-mail
| Size | 1/2 - 4 inch |
| Material | Metal |
| Shape | Round |
| Finish | Polished |
| Used to secure EMT Conduits to Electrical Boxes. They provide concrete, tight connections. The components are Electro-Plated with Zince to provide protection from corrosion |
| Size | 1/2-4 inch |
| Material | Malleable Iron |
| Finish | Polished |
| Usage | Pipe Clamp |
| To attach a conduit run at a 90° angle to a thin beam or structural member |
| Size | 1/2-4 inch |
| Material | Malleable Iron |
| Shape | Tee |
| Finish | Polished |
| Material | Metal |
| Packing Type | Box |
| Weight | 60 gm |
| Finish | Polished |
| Material | Metal |
| Packing Type | Box |
| Weight | 50 gm |
| Surface Finishing | Polished |
| Locknuts are used to fasten Cable Glands to the Gland Plate |
| Size | 2 inch |
| Material | Metal |
| Shape | Round |
| Finishing | Polished |
| Reducing Bushing reduces conduit hubs to a smaller size. It also connects two different sizes of conduit together or is used to replace a coupling and reducer in an installation |
| Size | 1/2-4 inch |
| Material | Metal |
| Surface Finish | Polished |
| Connection | Male and Female |
| Size | 1/2-4 inch |
| Material | Metal |
| Shape | Round |
| Finish | Polished |
| Length | 5 inch |
| Connection | Male |
| Size | 1/2 inch |
| Material | Metal |
| Finish | Polished |
| No of Hole | Single |
| They help to secure EMT Conduits, Flexible Metallic Conduit, Armoured Cables and Metal-Clad Cables to mounting surfaces |
| Size | 1/2-4 inch |
| Material | Metal |
| Thickness | 2-5 mm |
| Finsih | Polished |
| They help to secure EMT Conduits, Flexible Metallic Conduit, Armoured Cables and Metal-Clad Cables to mounting surfaces. Two Hole Straps for EMT are used where higher load bearing supports are desired |
| Material | Malleable Iron |
| Size | 1-4 inch |
| Shape | Round |
| Finish | Polished |
| Insulating Bushings protect cable from abrasion when using EMT, Rigid, IMC or PVC rigid conduit. They press fit onto the conduit and hold it firmly in place when the cable is pulled through |
| Material | Steel |
| Finish | Polished |
| Shape | Round |
| Size | 3/4 x 1/2 inch |
| Reducing Washer is designed to reduce the size of the knockout in a steel outlet box or other metal enclosure |
| Material | Iron |
| Weight | 200 gm |
| Finish | Polished |
| Size | 1 1/4-20 Tap |
| Beam Clamps are made of malleable iron construction. The clamp is intended for the use of hanging Threaded Rods. They are generally intended for attachment to overhead beams to act as suspension points for lifting appliances |
| Material | Malleable Iron |
| Size | 1/2-4 inch |
| Packaging Type | Box |
| Finishing | Polished |
| These malleable iron spacers are used in wet and dry locations in conjunction with malleable rigid conduit straps to create space between the conduit and mounting surface |
| Size | 1/2-4 inch |
| Material | Iron |
| Finish | Polished |
| Shape | Round |
| • For use in dry locations to couple two ends of EMT Conduits. They provide concrete, tight connections. The components are Electro-Plated with Zince to provide protection from corrosion |
| Size | 1/2-4 inch |
| Material | Metal |
| Shape | Round |
| Finish | Polished |
| • For use in dry locations to couple two ends of EMT Conduits. They provide concrete, tight connections. The components are Electro-Plated with Zince to provide protection from corrosion |
| Size | 1/2 - 4 inch |
| Material | Malleable Iron |
| Weight | 150 gm |
| Surface Finish | Polished |
| Used for horizontal & vertical installation for Steel & PVC Pipes |
| Material | Malleable Iron |
| Head Code | Round |
| Angle | 90 Deg |
| Finish | Polished |
| Liquid-tight, rain-tight, oil-tight, for protection and long life in wet, dusty, and corrosive environments |
| Material | Steel |
| Size | 1/2 to 4 inch |
| Shape | Round |
| Finish | Polished |
| Connection | Female |
| Material | Malleable Iron |
| Temperature | 10-20 Deg C |
| Weight | 30 gm |
| Packaging Type | Box |
| Size | 1/2-4 inch |
| Material | Malleable Iron |
| Packaging Type | Box |
| Head Code | Round |
| Finish | Polished |
| Size | 1/2-4 inch |
| Size | 1/2-4 inch |
| Material | Malleable Iron |
| Surface Treatment | Zinc Plated |
| Shape | Round |
| Color | Black |
| Packaging Type | Box |
| Finish | Polished |
| Size | 1/2-4 inch |
| Shape | Round |
| Material | Malleable Iron |
| Finish | Policed |
| Thickness | 2-10 mm |
| Material | Steel |
| Weight | 150 gm |
| Finish | Polished |
| Length | 6-8 inch |
| Size | 1/2-4 inch |
| Material | Malleable Iron |
| Packaging Type | Box |
| Surface Finish | Polished |
| Size | 1/2 - 4 inch |
| Material | Metal |
| Packaging Type | Box |
| Finish | Polished |